Fabtech pharmaceutical projects in the Middle East
We reply within 24 hours.
Sudair Pharma, Saudi Arabia
Fabtech Technologies has projects in three Middle East countries: the United Arab Emirates (UAE), Saudi Arabia and Bahrain. Seven projects are named: three in the UAE, three in Saudi Arabia and one in Bahrain. In Bahrain, our client is Gulf Biotech.
In Saudi Arabia, our turnkey project for Sudair Pharma covered the cleanrooms, the HVAC and the clean utilities of its oncology facility. In a turnkey project, one company designs, supplies, installs and tests the plant under one contract.
A cleanroom is a room where the air is filtered and controlled.
On this page
Fabtech projects in the Middle East: seven in three countries
Fabtech has seven named projects in the Middle East: three in the UAE, three in Saudi Arabia and one in Bahrain.
They include medicine plants, an oncology facility and operation theatres in a hospital. The UAE and Saudi Arabia also have their own pages with more detail.
Key fact Detail
- Countries
- Three: the UAE, Saudi Arabia and Bahrain
- Named projects
- Seven: three in the UAE, three in Saudi Arabia, one in Bahrain
- Geltec Pharmacare, Dubai
- Modular cleanroom panels, HVAC, electrical work, booths and a biosafety cabinet
- Sudair Pharma, Saudi Arabia
- The cleanrooms, HVAC and clean utilities of an oncology facility, as one turnkey project
- Madinat Al-Dawaa, Saudi Arabia
- Purified water generation, 1,000 litres per hour. WFI generation, 500 litres per hour
- Burjeel Hospital, UAE
- Operation theatres designed and built by Fabtech
Geltec Pharmacare, Dubai
United Arab Emirates
Geltec Pharmacare FZCO, Dubai is a plant that makes medicines. Our work there included 12,869 square metres of modular cleanroom panels.
Work done: modular cleanroom panels, HVAC (heating, ventilation and air conditioning), electrical work, sampling and dispensing booths and a biosafety cabinet. A booth is a work area with its own filtered air, where powders are sampled or weighed.
Wockhardt, UAE: Fabtech delivered a project for Wockhardt in the UAE.
Burjeel Hospital, UAE is a hospital. Work done: Fabtech designed and built its operation theatres.
An operation theatre is one kind of hospital cleanroom.
Read more on Fabtech projects in the UAE.
Madinat Al-Dawaa, Saudi Arabia
Saudi Arabia
Sudair Pharma, Saudi Arabia is an oncology facility. Oncology medicines treat cancer.
Work done: the cleanrooms, the HVAC and the clean utilities, as one turnkey pharmaceutical project. Clean utilities are the purified water, steam and gases that a plant uses.
Madinat Al-Dawaa, KSA is a pharmaceutical facility. KSA means the Kingdom of Saudi Arabia.
Work done: cleanroom modular panels, epoxy flooring, HVAC, purified water generation and distribution, WFI generation, a pure steam generator and distribution, compressed air, nitrogen piping, a boiler, electrical work and fire fighting.
Sanofi, Saudi Arabia: Fabtech delivered a project for Sanofi in Saudi Arabia.
Read more on Fabtech projects in Saudi Arabia.
Fabtech in Bahrain: Gulf Biotech
Gulf Biotech, Bahrain: Fabtech delivered a project for Gulf Biotech in Bahrain. Its Managing Director, Dr. Waqar Ahmad, has spoken about the project. Read what Gulf Biotech said about Fabtech.
Fabtech in the Gulf: the UAE, Saudi Arabia and Bahrain
The UAE: cleanroom panels in Dubai
The first point is Dubai, in the UAE. Here we supplied modular cleanroom panels to Geltec Pharmacare.
A modular cleanroom panel is a wall or ceiling panel that is made in a factory and joined on site. Fabtech makes these panels.
Saudi Arabia: an oncology facility
The second point is Saudi Arabia. For Sudair Pharma's oncology facility, Fabtech delivered the cleanrooms, the HVAC and the clean utilities as one turnkey project.
Saudi Arabia: water and steam at Madinat Al-Dawaa
The next point is the Madinat Al-Dawaa plant, also in Saudi Arabia. Here we supplied the water and steam systems.
The purified water system makes 1,000 litres per hour, and the WFI system makes 500 litres per hour. WFI (water for injection) is the highest grade of water in a medicine plant.
Bahrain: Gulf Biotech
The last point is Bahrain. Our client there is Gulf Biotech. Its Managing Director, Dr. Waqar Ahmad, said that Fabtech's "sincere efforts and hard work made it possible".
Buyers in Kuwait, Oman and Qatar
Fabtech takes orders for clean air equipment and cleanroom work from every Gulf country.
Our export team answers every enquiry from the region. If you are in Kuwait, Oman or Qatar, you can order clean air equipment and cleanroom work from us.
Buyers in Bahrain can order in the same way.
The range includes pass boxes, air showers and complete cleanrooms. A pass box is a small chamber with two doors.
It is used to move materials into a cleanroom. See our dynamic pass box.
An air shower blows filtered air over a person before they enter a cleanroom. See the full range of cleanroom and clean air equipment.
How a Gulf project runs, from design to handover
Our pharmaceutical engineering services team designs the plant from your product and your site.
We supply what the design needs. At Geltec Pharmacare in Dubai, that was cleanroom panels, HVAC, electrical work and booths.
We install the systems and commission them. Commissioning means starting each system and checking that it runs.
We then carry out qualification, which means the written tests and records that prove the plant works as designed. The four stages are DQ/IQ/OQ/PQ: design, installation, operational and performance qualification.
Our equipment qualification page explains each stage.
We hand the plant and its records to your team. At Madinat Al-Dawaa in Saudi Arabia, Fabtech later supplied spares and upgrades for the plant.
We build GMP and WHO compliant facilities. GMP means good manufacturing practice, the rules a medicine plant must follow.
The full method is on our turnkey pharmaceutical projects page.
In the client's words
Dr. Waqar Ahmad is the Managing Director of Gulf Biotech in Bahrain. He said this about the Gulf Biotech project, which he calls GBC.
GBC was our dream project Fabtech's sincere efforts and hard work made it possible. You are an inspiration to everyone.
Gulf Biotech, Bahrain
Sudair Pharma has also spoken about our work. Its words are on the Saudi Arabia projects page.
FAQ
Does Fabtech work in the Middle East?
Yes. Fabtech Technologies has projects in three Middle East countries: the United Arab Emirates (UAE), Saudi Arabia and Bahrain. Seven projects are named, each with its own page.
Does Fabtech work in Bahrain?
Yes. Gulf Biotech in Bahrain is a Fabtech project. Its Managing Director, Dr. Waqar Ahmad, has spoken about our work.
Which pharmaceutical companies in the Middle East has Fabtech worked for?
The named clients are Geltec Pharmacare and Wockhardt in the UAE, Sudair Pharma, Madinat Al-Dawaa and Sanofi in Saudi Arabia, and Gulf Biotech in Bahrain. Fabtech also designed and built operation theatres for Burjeel Hospital in the UAE.
What can Fabtech supply for a pharmaceutical plant in the Gulf?
Fabtech designs and builds complete plants as turnkey projects. We can supply cleanroom panels, HVAC, purified water and WFI systems, process equipment and qualification.
Can buyers in Kuwait, Oman and Qatar order from Fabtech?
Yes. Our export team answers enquiries from every Gulf country. Tell us the equipment or the cleanroom work you need, and your country.
Who qualifies the plant?
Fabtech does. Our team carries out the four qualification stages, DQ/IQ/OQ/PQ, and gives you the records.
How do I start a project with Fabtech in the Gulf?
Send us your product, your country and your site. We reply within 24 hours. The first step is a design discussion with our engineers.
Tell us your product, your country and your site