Madinat Al-Dawaa, KSA
The Madinat Al-Dawaa facility is in the Kingdom of Saudi Arabia (KSA). It is one of three Saudi projects in Fabtech Technologies' portfolio. We have published less detail about it than about the other two.

This is not Madinat Al-Dawaa's website. This website belongs to Fabtech Technologies. Fabtech did engineering work at the facility. Fabtech does not run the facility.






Fabtech in Saudi Arabia
This section describes projects of this type in general. It does not describe what was done at this facility.
Fabtech's published projects in Saudi Arabia include this facility, Sudair Pharma and Sanofi.

Sudair Pharma also has a full turnkey case study. The water and steam systems of this plant are described step by step on the page for Fabtech's projects in Saudi Arabia.
Three local conditions shape a pharmaceutical plant built in Saudi Arabia. None of them is about how the medicine is made.
The first condition is the climate. The cleanroom HVAC system (heating, ventilation and air conditioning) controls the air in the clean rooms where medicines are made.
In Saudi Arabia, the outside air means this system is designed first of all to dry the air. Drying the air is called dehumidification.
It is the main design case. It is not treated as a seasonal peak.
The second condition is the power supply. The power there runs at 60 Hz.
So pumps, motors and drives are chosen for 60 Hz from the start. They are not changed later.
The third condition is the documents the regulator needs. The Saudi FDA is the medicines regulator in Saudi Arabia.
Qualification documents prove that the equipment and rooms work as they were designed to. They are written in the format the Saudi FDA expects.
This work is part of the project scope. It is not treated as extra paperwork.