Fluid bed suite: processor, dryer and coater

Fabtech supplies fluid bed dryers, granulators and processors in lab, pilot and commercial production models, cGMP and 21 CFR Part 11 compliant. A fluid bed machine holds powder up in rising air, so one vessel can granulate, dry and coat it.

We reply within 24 hours.

Send us your product, batch size and moisture target, and we will specify the machine
  • Fluidisation means blowing air up through a layer of powder fast enough to lift it.
  • The powder then moves like a liquid.
On this page

The fluid bed machines we supply

The suite has three machines: the fluid bed dryer, the fluid bed granulator and the combined processor-coater.

This is the fluid bed processor working principle.

A sprayed binder granulates the powder. The wet particles collide and stick together.

As several ingredients can be mixed, granulated, and dried in the same vessel, the material handling and process times are shorter than other wet granulation processes.

Fluid bed technology has been standard in the pharmaceutical industry for decades. Fluid bed machines are found on almost every oral solid dosage line (tablets and capsules), from laboratory scale to industrial production.

  • Heated air dries the powder, because the air reaches every particle surface at the same time.
  • HEPA (high-efficiency particulate air) filters stop particles. They do not stop gases or vapours.
  • A binder is a liquid that makes particles stick.
  • A sprayed polymer film coats the particles.
  • The rising air carries fine particles (fines) upward.
  • The filter holds them back and shakes them down at regular intervals.

Fluid bed dryer (FBD)

A fluid bed dryer (FBD) removes water or solvent from powders and granules.

Fabtech's Fluid Bed Dryers are fast heat exchangers.

A Fabtech fluid bed dryer installed in a cleanroom, with the rest of the granulation line around it

Fluid bed dryer specifications

  • Fully sealed pneumatically controlled damper with 0 to 100% positioning for accurate air monitoring and control.
  • Recipe-based batches can be set, and critical process parameters can be validated.
  • Highly reliable and reproducible equipment that is cGMP compliant in all aspects, including 21 CFR Part 11 needs.
All specifications
  • A special feature provides added safety, automation and process controls.
  • Unique conidure plate design provides improved process efficiency.
  • Compatible with scrubber systems, silencers and explosion prevention systems.
More detail

They use a fluidization process to dry the ingredients to a low moisture content at relatively low temperatures.

The equipment is designed for a high drying rate and a shorter drying time. It gives the desired uniform moisture content.

The high output of the FBD makes it an ideal choice for granulation areas. It has broad applications in the pharmaceutical, chemical, food and allied industries.

Wet granules must be dried to a narrow moisture range before they are pressed into tablets.

Granules that are too wet stick in the tablet press. Granules that are too dry lose the plasticity (the ability to change shape under pressure) that lets them bond.

The properties of a good tablet granulation page gives this range and explains how it is measured.

The retention filter decides how a dryer runs from day to day.

Depending on the design, fluid bed dryers use screens, sieves or filter bags for this. The filter is a wearing part. It needs its own cleaning and integrity checks.

Fabtech supplies the machine and stays responsible for it. So we choose the filter arrangement to suit your product.

Ask every fluid bed dryer manufacturer and supplier about the filter. The answer changes cleaning validation (the proof that the machine can be cleaned properly).

Fluid bed granulator

A fluid bed granulator sprays a binder solution into the fluidised bed.

The granules grow while the particles float in the air.

Fabtech describes three generations of this technology.

The usual set-up sprays from the top (top spray).

The first was top spray.

Bottom spray gives the most uniform film across all the particles.

The second was the bottom-spray Wurster.

The third was tangential spray, also called Roto Granulation. It became popular for handling pellets. The tangential version is the Roto Granulator. It is a configuration of the fluid bed processor. It is not a separate class of machine.

More detail

The fluid bed granule is lighter, more porous and easier to wet than a high-shear granule.

In addition to granulation for tabletting, the fluid-bed top spray method produces highly dispersible granules with a characteristic porous structure that enhances wettability.

FBD granulation is the usual choice when the dissolution rate (how fast the medicine dissolves) matters. It is also the usual choice for a sachet or a suspension.

The machine can also make pellets in every configuration. Pelletising means building up pellets by layering solution onto seed cores.

The granulation techniques page explains which granulation route each drug molecule needs. Our high-shear versus fluid-bed guide compares the two granules directly.

Fluid bed processor and coater

Fabtech's Fluid Bed Processors are designed to carry out multiple processes like granulation, agglomeration and coating.

Agglomeration means joining small particles into larger ones.

The product container of a Fabtech fluid bed processor, with the expansion chamber and its sight glass above it

Fluid bed processor and coater specifications

  • Fully sealed pneumatically controlled damper with 0 to 100% positioning for accurate air monitoring and control.
  • 3-stage filtration: pre-filtration, fine filtration and HEPA filtration.
  • Spray gun designed for precise control of the coating process.
All specifications
  • Spray nozzle in single or multi-nozzle configuration, with a peristaltic pump for delivering spray medium.
  • Sampling port to remove a sample for testing without interrupting the cycle.
  • Specially designed temperature port to monitor and maintain accurate temperature throughout the process cycle.
More detail

One machine combines the processor and the coater.

As a coater, the machine applies a film to granules, pellets and particles. It does not coat tablets. A perforated pan cannot do this work.

Top spray suits taste masking and protective coats.

Bottom spray is the usual choice for modified release (a medicine that releases its drug slowly or at a set time). The pharmaceutical coating page covers both methods.

Key fact Detail

Models
Lab, pilot and commercial production
Compliance
cGMP and 21 CFR Part 11
Construction
SS 316 or SS 316L
Filtration
3 stages, to HEPA
Containment
Fits high containment isolation systems

Specifications

These specifications apply to every machine in the fluid bed suite.

ScaleLab, pilot and commercial production models
ConstructionSS 316 / SS 316L. Product contact parts mirror-finished, non-contact parts matt-finished
CompliancecGMP, and 21 CFR Part 11 for the records the control system creates
Air handling3-stage filtration to HEPA; pneumatically controlled damper, 0 to 100%
ContainmentCan be integrated with high containment isolation systems
SafetyCompatible with scrubber systems, silencers and explosion prevention systems

Containment, qualification and scale

The system allows for easy validation and cleaning and can be integrated with high containment isolation systems while maintaining the operator's safety at all times.

Products that need full enclosure use fluid bed isolators. The granulation isolator is the enclosure built for this.

A Fabtech fluid bed unit on its frame, seen from the front
More detail

Charging (loading) and discharge (unloading) are the points that need enclosing. So an inline fluid bed dryer, fed straight from a granulator, is easier to contain than one loaded by hand.

The lab, pilot and commercial models use the same geometry, air-handling principle and recipe structure.

So scale-up, from a small batch to full production, is a documented step. It does not need a new specification.

Fabtech hands over every unit with a qualification file. It starts with the URS (user requirement specification, your written list of needs) and the design qualification.

Next is a factory acceptance test before the machine is shipped. Then come site acceptance, installation, operation and performance qualification at your plant.

The full sequence is on the qualification page. The rest of the range is in the process equipment catalogue.

We reply within 24 hours.

FAQ

What is a fluid bed processor?

It is a machine that holds powder up in a stream of air that flows upward. Every particle is surrounded by moving air. In this state, one vessel can granulate, dry or coat the powder.

What does FBD stand for?

FBD stands for fluid bed dryer. People also use it, loosely, for fluid bed granulation done in the same class of machine.

What is the difference between a fluid bed dryer and a fluid bed granulator?

Both work the same way. A dryer passes heated air through the bed to remove moisture or solvent. A granulator sprays binder solution into the bed. The wet particles collide and stick, so the granules grow while they float in the air.

How is fluid bed granulation different from high-shear granulation?

A top-spray fluid bed granule grows while it floats and tends to be lighter and more porous. A high-shear granule is pressed into a mass and tends to be denser. Exceptions exist. Processing air changes bulk density. A tangential roto bed machine yields denser granules.

Is fluidised the same as fluidized?

Yes. Fluidised is the British spelling and fluidized is the American spelling of the same word. Fluid bed, fluidised bed and FBD all name the same equipment.

What scales is it available in?

Fabtech supplies it in lab, pilot and commercial production models, cGMP and 21 CFR Part 11 compliant. They are made in SS 316 or SS 316L. The product contact parts are mirror-finished. The non-contact parts are matt-finished.

Can it be run under containment?

Yes. The system can be integrated with high containment isolation systems. It is also compatible with scrubber systems, silencers and explosion prevention systems for solvent processes.

Send us your product, batch size and moisture target, and we will specify the machine