Biorem Laboratoire
Fabtech delivered a project for Biorem Laboratoire in Algeria. Read what its General Manager said.
Read more: Biorem Laboratoire, Algeria
Pharmaceutical projects in Algeria
Fabtech has four named pharmaceutical projects in Algeria: CPCM, Biorem Laboratoire, Tabuk and Rosas. At CPCM we supplied 2,712 square metres of modular cleanroom panels.
We reply within 24 hours.
A cleanroom is a room where the air is filtered and controlled. A modular cleanroom panel is a factory-made section of a cleanroom wall or ceiling.
At CPCM, our scope ran from engineering advice for the tablet and capsule section to the panels, the doors, the floor and the fire hydrant system. The General Manager of Biorem Laboratoire said: "Bravo!
you're commissioning our next project as well."
On this page
Fabtech projects in Algeria
Fabtech has four named pharmaceutical projects in Algeria: CPCM, Biorem Laboratoire, Tabuk and Rosas.
At CPCM, our scope ran from engineering advice to the fire hydrant system. The steps are described further down.
The CEO of CPCM and the General Manager of Biorem Laboratoire have both described our work.
Key fact Detail
- Modular cleanroom panels at CPCM
- 2,712 square metres
- Named projects in Algeria
- Four: CPCM, Biorem Laboratoire, Tabuk and Rosas
- Scope of work at CPCM
- Consultancy for the tablet and capsule section, cleanroom equipment, panels, doors, HVAC, electrical work, epoxy flooring, utility piping, fire hydrant system
- Clients quoted by name
- Hakim Bouzid, CEO, SARL CPCM. Dr Nabil Bensouhali, General Manager, Laboratorie Biorem
CPCM
CPCM has a pharmaceutical facility in Algeria. CPCM is also known as Laboratoire CPCM Pharma.
Fabtech gave consultancy for the tablet and capsule section of the plant, and supplied 2,712 square metres of modular cleanroom panels.
The scope also included ceiling panels, doors, HVAC, electrical work, epoxy flooring, utility piping and a fire hydrant system. HVAC means heating, ventilation and air conditioning.
Each item is explained in the next section.
The cleanroom equipment was supplied as a turnkey project. In a turnkey project, one company designs, supplies, installs and tests the plant under one contract.
Work done: consultancy and engineering, modular cleanroom panels, cleanroom HVAC.
Read more: CPCM, Algeria
Tabuk
Fabtech delivered a project for Tabuk in Algeria.
Read more: Tabuk, Algeria
Rosas
Fabtech delivered a project for Rosas in Algeria.
Read more: Rosas, Algeria
An introduction that came from Algeria
A person we had worked with on a project in Algeria later introduced Fabtech to Sudair Pharma in Saudi Arabia.Fabtech then delivered a turnkey project for the oncology facility of Sudair Pharma.
Read the Sudair Pharma case study.
How the CPCM cleanroom was fitted out
At CPCM, Fabtech's scope covered the advice, the room and the services that run through the room.
Consultancy for the tablet and capsule section
The first picture is a drawing of the plant. Fabtech gave consultancy for the tablet and capsule section.
Consultancy is engineering advice given before building starts, for example on the layout of the rooms.
Panel walls and ceiling
The walls of the cleanroom are modular panels. They are made in a factory and joined on site, so the surfaces are smooth and easy to clean.
Fabtech makes its own cleanroom panels. The scope for CPCM lists ceiling panels as well.
Doors
Doors are set into the panel walls. The scope lists three kinds: single doors, double doors and emergency doors.
A double door lets large equipment and trolleys pass. An emergency door gives people a way out of the clean area.
Epoxy floor
The floor is coated with epoxy, a resin that is laid over the concrete. It has no joints, so there are no gaps where dust can collect.
The scope also lists 15 stainless steel drain traps. A drain trap is the fitting at a floor drain, and it holds a little water that stops air from the drain entering the room.
HVAC
Air now enters the room through the HVAC system. The system supplies filtered air and controls the temperature, the humidity and the air pressure of each room.
HVAC was part of Fabtech's scope at CPCM.
Electrical work
Power and light reach the room through the electrical work. Electrical work means the power supply, the cables and the lighting of a plant.
It was part of Fabtech's scope at CPCM.
Utility piping
Pipes carry the utilities to the rooms where they are used. Utilities are the services that a plant needs for production, such as water, steam and compressed air.
Utility piping was part of Fabtech's scope at CPCM.
Fire hydrant system
Outlets for fire hoses are the last item. A fire hydrant system is a network of water pipes with outlets for fire hoses.
Fabtech's scope at CPCM included one.
How a project in Algeria runs
At CPCM, the scope ran from consultancy to panels, HVAC and utility piping.
A full project runs in this order.
First we design the plant with you. This is the work of our pharmaceutical engineering services, and at CPCM it was consultancy for the tablet and capsule section.
Then we supply the panels and the equipment. For CPCM we supplied the wall panels, the ceiling panels and the doors.
We install the systems and commission them. Commissioning means starting each system and checking that it runs.
Qualification is the next stage, and it means the written tests and records that prove the plant works as designed. The four stages are design, installation, operational and performance qualification, and engineers call them DQ/IQ/OQ/PQ.
Our equipment qualification page explains each stage.
Last, we hand over the plant and its records.
One contract can cover all of this work.That is a turnkey pharmaceutical project.
Fabtech builds GMP and WHO compliant facilities. GMP means good manufacturing practice, the rules a medicine plant must follow.
WHO is the World Health Organization.
What clients say
The CEO of CPCM said:
The team's unwavering attention to detail and tenacity in face of all the challenges was indispensable in bringing our dream project to life.
The General Manager of Biorem said:
All I have to say to Fabtech is this: Bravo! you're commissioning our next project as well.
The Plant Manager of Tabuk Pharmaceuticals said:
Team Fabtech showed flawless work ethics, high execution standards and always emphasised our satisfaction as their prime objective.
FAQ
Does Fabtech work in Algeria?
Yes. Fabtech has four named pharmaceutical projects in Algeria: CPCM, Biorem Laboratoire, Tabuk and Rosas. At CPCM we supplied 2,712 square metres of modular cleanroom panels.
What did Fabtech do at CPCM in Algeria?
Fabtech gave consultancy for the tablet and capsule section. The scope also included cleanroom equipment, modular panels, ceiling panels, doors, HVAC, electrical work, epoxy flooring, utility piping and a fire hydrant system.
What can Fabtech supply for a pharmaceutical plant in Algeria?
At CPCM we supplied cleanroom panels, doors, HVAC, electrical work and utility piping. Fabtech also designs pharmaceutical plants and supplies process equipment and water systems. One contract can cover the whole plant as a turnkey project.
Who qualifies the plant?
Fabtech does. Our team carries out the four qualification stages, DQ/IQ/OQ/PQ, and gives you the records.
Which standards does Fabtech build to?
Fabtech builds GMP and WHO compliant facilities. GMP means good manufacturing practice, the rules a medicine plant must follow.
How do we start a project with Fabtech in Algeria?
Send us the product you want to make, the capacity you need and the location of your site. We reply within 24 hours. The first step is a discussion with our engineers about the design.
Tell us about your project in Algeria