Particle Sizers
Vibro-Sifter
Fabtech’s Vibro-sifter is a compact, portable design based on the ‘gyro’ principle. The gyratory motion comes from a specially designed gyro motor fitted underneath the vibrating assembly isolated from the base by specially designed springs. The adjustable vibratory motion efficiently sifts extraneous or oversized particles, agglomerates or fines generated during processing to produce precise particles in the desired size ranges and also allows for dust-free sifting. The IPC bin and hopper are designed to connect, preventing dust generation during the transfer and sifting process.
This system is GMP compliant, easy to handle and clean, with easy access to all exposed areas and corners, minimising the risk of cross-contamination. Available in multiple mesh sizes to suit individual processing needs. 21 CFR Part 11 compliant.
Specifications
Energy efficient
Low noise and high-speed operation
Motor made of flame-proof material
Constructed with SS 316/SS316L
The product contact parts are mirror-finished and the non-contact parts are matt-finished
Multimill
Fabtech’s Multi-mill is ideal for high-speed granulating, mixing, shredding, chopping and pulverising of a wide range of wet and dry materials. It utilises variable force with hammer blades that have both knife and impact edges rotating with the screen to control size reduction. The direction of the blade can be changed using a reverse switch for the hammer or knife operation. It features multiple combinations of screens and speeds. It has a higher screen opening area for greater throughput and a perforated screen at the bottom of the pulverising chamber for granule size control and fineness.
Specifications
Constructed with SS 316/SS316L
The product contact parts are mirror-finished and the non-contact parts are matt-finished
Built-in variable frequency drive for multiple speeds
Changeable number of blades to suit the process and material
Dry Co-mill
Fabtech’s dry co-mill is used for milling and sizing operations. Particle size distribution (PSD) is tightly contained with a sieve, depending on the screen and impeller choices. The milling is efficient, with higher output, fewer fines, and no dusting of material. Dried granules are transferred to the dry co-mill through a vacuum transfer system and, after milling, to the bin blender by gravity. The compact design is easy to clean and operate. The mill works on forced pressure and generates very little heat.
Specifications
Constructed with SS 316/SS316L
The product contact parts are mirror-finished and the non-contact parts are matt-finished
Built-in variable frequency drive for multiple speeds
Accurate speed control and continuous process achieve uniform particle size distribution
Explore our resources for Process
Request a callback
Related products
High Shear Mixer
Fluid Bed Suite
